SD ZINC PRIMER 2000 无机富锌底漆2000
PRODUCT DESCRIPTION
产品简介
A self-curing inorganic zinc coating based on alkyl silicate binder
烷基硅酸酯为基料的自干型无机富锌涂料
RECOMMENDED USE
用途
Compatible with blasted steel surfaces and inorganic zinc shop-primed surfaces
适用于预处理后的钢材及无机富锌车间底漆表面
COMPLIED STANDARDS
符合标准
Complies with ISO 12944-5、SSPC PAINT 20、HG/T 3668-2009
符合ISO 12944-5、SSPC PAINT 20、HG/T 3668-2009 富锌底漆中的成分要求
FEATURES
产品特性
Remarkable corrosion resistance
极好的防腐性能
Outstanding resistance to impact, mechanical abrasion and organic solvent
优良的耐冲击、耐磨损和耐有机溶剂性能
Excellent initial hardness
极好的初始硬度
High-build applicability
极好的厚涂施工性能
Remarkable heat resistance and less scorch by heat treatment
优良的耐热性，热处理烧损少
PHYSICALPROPERTIES
基本数据
Color
颜色
Volume Solids
体积固体份
VOC
挥发性有机化合物含量
Flash Point
闪点
Film thickness
涂装膜厚
Theoretical Coverage
理论涂布率
Grey
灰色
60%
402g/L，accord with EU Dircrtive2004/42/EC，subcategory j
402g/L，符合欧盟溶剂排放指令2004/42/EC，j 子类别
Greater than 19℃
19℃以上
Dry : 60-75 microns/coat Wet : 100-125microns/coat
干膜: 60-75 微米/道湿膜:100-125 微米/道
0.373kg/m2/75microns
0.373 千克/平方米/75 微米
Practical coverage depending on surface conditions, environment, applications, etc.
实际涂布率与表面处理, 外界环境, 施工方法等多种因素有关。
APPLICATION
施工
Application Temperature
施工温度
Mixing
混合
Mixing Ratio
混合比例
Pot Life
混合使用期
5℃-40℃
Add powder to liquid first, then mix thoroughly with power agitator
将粉末加入液体，使用动力工具搅拌均匀
Liquid/Powder=20/86(by weight)
液体粉末=20/86（重量比）
5℃ 10℃ 20℃ 30℃
8hrs 7hrs 6hrs 5hrs
Application Methods
施工方法
Thinner
稀释剂
Drying time &
Overcoating interval
干燥时间&涂装间隔
Applied Substrates
适用底材
Typical topcoat
适用上涂
Airless spray, air spray
无气喷涂、空气喷涂
Airless spray 无气喷涂
Nozzle tip 喷嘴尺寸0.43mm-0.53mm
Nozzle pressure 出口压力≥10Mpa
Thinning ratio 稀释比率0-10% by weight（重量比）
SD ZINC 2000PRIMER Thinner
专用稀释剂
Temperature 温度5℃ 20℃ 30℃
Surface dry 指触干燥60mins 30mins 30mins
Touch dry 半硬干燥6hrs 3hrs 1hr
Min. interval 最小涂装间隔48hrs 48hrs 48hrs
Max. interval 最大涂装间隔
Bare steel
裸钢
Epomarine Sealer Primer or according to the coating system of Cosco Kansai.
环氧连接漆或参考我司涂装配套
