GAM 860H drill needle automatic grinding machine

Specification item GAM860H

Diameter of drill needle? 0.1-1.0 mm Different diameters require replacement of grinding wheel and V-groove specifications

Drill stem diameter? 3.175mm (marking) /? 2.0mm (selection)

115 degree ~140 degrees of drill point angle can be adjusted

Surface angle of drill point 5 degree ~30 degree

Capacity? 0.1~? 0.35mm: 400UPH,? 0.4~1.0mm: 300UPH

Yield? 0.2 mm ~? 0.35 mm: 95% (before study 2), below? 0.15 mm: 90% (before study 2), above? 0.4 mm: 90% (before study 2)

400 incoming and outgoing trays 50/8 boxes (standard), 100/4 boxes (optional), other boxes (optional)

50 disks (matching) 100 branches (matching)

Drilling needle cleaning automatic cam type high efficiency cleaning

The outer diameter of the grinding wheel? 75mm

Rotational speed of sand rotation 6000RPM (max.)

Minimum feed volume 0.5um programmable set

Automatic grinding system of grinding wheel dressing programming

Control system PC Base + PLC

Optical system high rate fixed / zoom lens

High resolution CCD + LED light source for image acquisition system

AIO System Edge Detection and Analysis Software + SPC Statistical Chart

Operating system Windows

Air pressure requirement 6kg/cm2

Gas consumption is about 120L/min

Power demand AC220V + 10%

Power consumption 2.5kwg

Machine size 1480*1000*1740mm (no three color lamps)

Machine weight 1200kg